Jan C. Still Lugerforums banner
1 - 3 of 3 Posts

· Registered
Joined
·
174 Posts
Discussion Starter · #1 ·
It is stamped BOHMISCHE WAFFENFABRIK A.G. IN PRAG (Wa) 228069 on top of slide. That is the only place with a serial number. It is all machined parts..except the mag catch and the safety release..which is broken. It is the German military finish and shows no wear..has the Wa76 above grip on right..and on the barrel. The machine marks are evident under the finish. The mag is stamped P Mod 27. The grips were perfect until the guy who was showing me the pistol couldn't get the mag removed..he used a screwdriver and chipped a hunk out of the rear of the grips before I could stop him. I ended up getting the pistol for $170 and repaired the grips..also have a line on a safety release from the trader board. The Cz's are multiplying...Cone Ten
 

· Registered
Joined
·
71 Posts
Normally these have also the serialnumber on the front left side of the frame, most of the guns I have seen with the top of the slide marked, have also the serialnumber on the barrel !!!
Most guns with fnh marking and no marking on the top of the slide have no serailnumber on the barrel !!
Who can tell a bit more about what is ussual on these and what not.
 
1 - 3 of 3 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top