Joined
·
3,509 Posts
I will start with this long post by saying I passed on this gun which is featured on page 171 of Buxton Vol. 1, it has a picture of the pistol on page 221 serial number 04119. (Experimental take down/cam face. 3rd variation 0 series) It was sold to another collector when I passed on it. My reason for passing is my own. I believe the gun is interesting for what it is, the only one reported.
This is a photo of the left side, notice the take down lever is missing and the experimental take down/cam in place.
Download Attachment:
DSCN2176.JPG
56.73 KB
This is a photo of the right side, notice the take down lever is missing and the experimental take down/cam in place.
Download Attachment:
DSCN2185.JPG
59.34 KB
The e/s proof in "the white" with the 2nd acceptance stamp missing.
Download Attachment:
DSCN2191.JPG
63.12 KB
Crossed out serial number, mag was an P.38v e/359.
Download Attachment:
DSCN2171.JPG
56.91 KB
Red and White sights
Download Attachment:
DSCN2194.JPG
50.64 KB
The new push through take down had a hole cut in the frame with an extra groove cut on the locking block to make the take down device work.
Download Attachment:
DSCN2150.JPG
57.68 KB
Download Attachment:
DSCN2153.JPG
57.6 KB
New push through take down, unmarked.
Download Attachment:
DSCN2164.JPG
48.14 KB
The block with machined groove for the new take down.
Download Attachment:
DSCN2145.JPG
50.83 KB
Block proofed e/n
Download Attachment:
Block EN.jpg
50.88 KB
Any thoughts?
Mark
This is a photo of the left side, notice the take down lever is missing and the experimental take down/cam in place.
Download Attachment:

56.73 KB
This is a photo of the right side, notice the take down lever is missing and the experimental take down/cam in place.
Download Attachment:

59.34 KB
The e/s proof in "the white" with the 2nd acceptance stamp missing.
Download Attachment:

63.12 KB
Crossed out serial number, mag was an P.38v e/359.
Download Attachment:

56.91 KB
Red and White sights
Download Attachment:

50.64 KB
The new push through take down had a hole cut in the frame with an extra groove cut on the locking block to make the take down device work.
Download Attachment:

57.68 KB
Download Attachment:

57.6 KB
New push through take down, unmarked.
Download Attachment:

48.14 KB
The block with machined groove for the new take down.
Download Attachment:

50.83 KB
Block proofed e/n
Download Attachment:

50.88 KB
Any thoughts?
Mark