Jan C. Still Lugerforums banner
1 - 4 of 4 Posts

Discussion Starter · #1 ·

I have a DWM Luger (script on the toggle) that is non dated as to year of production.Marked with a two digit serial on the frame above the trigger guard, left side of the barrel inside of plate and on the safety switch visible when in safe position. Also on the inside of the plate is the # 4.Trigger is marked with a 6. Barrel has G stamped on the underside and toggle is stamped with a 5 on the inside as well. Several Crown over N proofs in various places. Also marked Germany on the back above the Lanyard ring. Has lug for shoulder stock. Sear Safety with Gesichert mark. Under the grips on the frame there are several more barely visible marks an F, D and N on the left and a K on the top right near the back end covered by the grips. Grips are stamped with a Large 3 small 46 and H on one side and with a 5 and a W. I will post photos when I get the chance. Let me know your thoughts.

Download Attachment: RLH -16.jpg

Download Attachment: RLH-17.jpg

· Administrator
16,738 Posts
Ryan, you do have to give folks time to answer... Your first question was at 11:30 PM Eastern time, and the 2nd at 12:06 AM. I am sure there will be some good feedback for you.


Discussion Starter · #4 ·
The Luger is serial # 16 it is marked on the frame underneath the barrel. on the left side of the barrel. On the inside of the plate and on the safety switch.
1 - 4 of 4 Posts
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.